90
Adjusting the Date and Time
- If the battery is removed for approximately 24 hours or more, the date and
time settings will be lost. In this case, please reset the date and time.
Using the Set-up Menu (Cont’d)
1. Select “DATE SET”, press 왘 and the date
and time settings screen appears.
See Steps 3 to 7 on pages 24 and 25 about
how to make the settings.
• Once settings are completed, you will return to
the set-up menu.
Setting the Self-timer Delay Time
- You can change the length of time the self-timer delays before shooting
from 10 seconds (default) to 3 seconds.
1. Select “SELF TIMER”, press 왘 and the
settings screen appears.
Using 왔 or 왖, select “3 sec” and press either
왘 or the MENU/SET button. The setting is
completed and you return to the set-up
menu.
• If you press 왗, the setting is invalidated and you
return to the set-up menu.
1
1
To Next Page
Loading...
