36 Part Number STH063 9/17
TOGGLE SWITCH OPERATION
Moving the toggle switch to clean will start a Clean cycle.
• Setting the ice machine to stop after the clean cycle:
Place the toggle switch in the clean position. The ice
machine will stop after the clean cycle.
• Pausing the cleaning cycle: Move the toggle switch to
Off. Moving the toggle switch to clean will restart the
clean cycle.
• Setting the ice machine to start ice making after the
clean cycle: Place the toggle switch in the Ice position
more than 2 minutes into the clean cycle.
Step 1 Place the toggle switch in the clean position
after ice falls from the evaporator at the end of a Harvest
cycle. Or, place the toggle switch in the off position and
allow the ice to melt off the evaporator.
,
Caution
Never use anything to force ice from the evaporator.
Damage may result.
Step 2 Remove all ice from the bin.
n
Warning
Wear rubber gloves and safety goggles (and/or face
shield) when handling Ice Machine Cleaner or Sanitizer.
To Next Page
Loading...
