Part Number STH063 9/17 37
,
Caution
Do not mix Ice Machine Cleaner and Sanitizer solutions
together. It is a violation of Federal law to use these
solutions in a manner inconsistent with their labeling.
Step 3 To start a cleaning cycle, move the toggle switch
to Clean. Water will flow through the water dump valve
and down the drain. Wait until the water trough refills,
then add the proper amount of ice machine cleaner to the
water trough.
Model Amount of Cleaner
KT0300 - KT0400 - KT0420
KT0500 - KT0700 - KT1000
5 ounces (150 ml)
KT1700 9 ounces (265 ml)
Step 4 Wait until the clean cycle is complete
(approximately 24 minutes) then place the toggle switch in
the off position and disconnect power and water supplies
to the ice machine.
Step 5 Remove parts for cleaning.
Refer to the proper parts removal for your machine.
Continue with Step 6 when the parts have been removed.
To Next Page
Loading...
