Korg D1 - MIDI Function Details; MIDI Channel and Filtering; Sound and Program Mapping

15
*2: Table of sounds and corresponding program
change numbers.
CC0:BankSelect(MSB)forallsoundsissetto121.
SoundBuon Bank CC32 PC Sound
PIANO1 1 1 0 Concert Piano
2 0 0 Grand Piano
3 2 1 Pop Piano
PIANO2 1 0 1 Jazz Piano
2 0 3 Honky-Tonk Piano
3 0 2 Electric Grand Piano
E.PIANO1 1 0 4 Stage Electric Piano
2 1 4 Bright Electric Piano
3 3 4 Tremoro Electric Piano
E.PIANO2 1 0 5 Digital Electric Piano1
2 1 5 Digital Electric Piano2
3 2 4 60’s Electric Piano
HAR PSI/CLAV 1 0 6 Harpsichord
2 0 7 Clav
3 1 7 Synth Clav
VIBES/
GUITAR
1 0 11 Vibraphone
2 0 12 Marimba
3 0 24 Acoustic Guitar
ORGAN1 1 0 16 Jazz Organ1
2 1 16 Jazz Organ2
3 0 17 Jazz Organ3
ORGAN2 1 0 19 Pipe Organ1
2 1 19 Pipe Organ2
3 2 19 Positive Organ
STRINGS 1 0 48 Strings
2 0 50 Cinema Strings
3 1 50 Analog Strings
CHOIR 1 0 52 Aah Choir
2 1 52
OohVoices
3 2 52 Classical Choir
List of MIDI functions
Button Function Setting Display
Description [default setting]
PIANO1
MIDIChannnel*1 C01...C16
1...16 [C01]
SpecifythetransmissionchannelforMIDI
data.
PIANO2 LocalOn/O on, oFF
Enabling(turnon)/disabling(turnoff)the
D1 sound source
[
on
]
WiththeLocalOnseing,playingtheD1’s
keyboard produces the sounds of the perfor-
manceaswellastransmitsMIDIdata.With
the Local Off setting, playing the D1’s key-
board does not produce the sounds of the
performance;MIDIdataisonlytransmied.
Normally this parameter is set to Local On
(defaultseing:on).
Disable this (set to “oFF”) in order to prevent
echo back (two sounds playing unintention-
ally at the same time).
E.PIANO1 PC Filter *2 on, oFF
Enabling/disablingprogramchangetrans-
mission/receptionfiltering[oFF:transmis-
sion/reception]
TheprogramsonaconnectedMIDIdevice
canbechangedbysendingaMIDIchange
number from the D1. In addition, the pro-
grams on the D1 can be changed by receiv-
ingaMIDIchangenumberfromaconnect-
edMIDIdevice.
If an incompatible program change number
is received, the D1 sound is not changed.
E.PIANO2 CC Filter on, oFF
Enabling/disablingcontrolchangetransmis-
sion/receptionfiltering[oFF:transmission/
reception]
Messages,suchasusageoftheD1’sdamper
pedal, can be transmitted to a connected
externalMIDIdevicetocontrolit,andthese
messages can be received from the external
MIDIdevicetocontroltheD1.
HARPSI/
CLAV
Multi-timbralOn/O on, oFF
Operating as a 16-part multi-timbral sound
module [on: operating]
The D1 can operate as a 16-part multi-tim-
bralsoundmodulewhenanexternalMIDI
device is used to control its internal sound
generator.
*1: MIDI channel
InLayerMode,thisseingwillbethetransmissionchan-
nel for layer 1, and the transmission channel for layer 2
will automatically be set to the following channel.
Forexample,ifMIDIchannelC07isselectedforlayer1,
MIDIchannelC08willautomaticallybespeciedforlayer
2.IfMIDIchannelC16isselectedforlayer1,MIDIchannel
C01willbespeciedforlayer2.