197
MIDI implementation chart
Consult your local Korg distributor for more information on MIDI IMPLEMENTATION.
Basic
Channel
Function
Transmitted
MIDI Implementation Chart
Recognized
Remarks
Default
Changed
Date: 2003.8.20Model D32XD/D16XD
Aftertouch
Pitch bender
Polyphonic (Key)
Monophonic (Channel)
0 – 119
Program
Change Variable Range
System
Real Time
Clock
Command
System Exclusive
System
Common
Quarter frame
Song Position
Song Select
Tune
Mode 1 : OMNI ON, POLY Mode 2 : OMNI ON, MONO : Yes
Mode 3 : OMNI OFF, POLY Mode 4 : OMNI OFF, MONO : No
Aux
Messages
Notes
Local On/Off
All Notes Off
Active Sense
Reset
Control
Change
Velocity Note On
Note Off
Note
Number: True Voice
Mode
Memorized
Messages
Altered
0 – 127
*5
*7
*3
*4
*3
*1
*1
*1
*1
*8
*8 *9
*6
[Digital Recording Studio]
*1
*2
EffectControl (Received) ControlChange #000–119 are Recognized.
MixerControl (Transmitted/Received) Mixer Ch1–16 (Ch17–32) Parameters
7 (39) Fader
8 (40) Pair Switch
9 (41) Channel OnOff
10 (42) Pan
12–13 (44–45) EffSend1/2
14–15 (46–47) AuxSend1/2
16–27 (48–59) EQ Low/LMid/HMid/High
28 (60) Channel EQ Switch
29 (61) Attenuator
30–31 (62–63) AuxSend3/4 *10
96–102 (32–38) Rec/Eff/Aux SendPosition
75–79 MasterEQ Parameters
80 MasterEff1/2 Return Level
81 MasterEff1/2 Return Balance
85–86 Aux1/2 Master Level
87–88 Aux3/4 Master Level *10
89 Master Level
103–111 SubMixer Ch1–16 Parameters
112–119 SubMixer Ch17–24 Parameters
*2
*1:Received as the EffectControl when it is selected in [SYSTEM] “Control”.
*2:
Transmitted/Received as the MixerControl when ControlChange is enabled in [MIDI].
(Consult your local Korg distributor for more information about MixerControl.)
*3:Transmitted/Received when ProgramChange is enabled in [MIDI].
*4:Transmitted when “MMC Transmit”or “MTC Master” is selected in [MIDI].
*5:Received when “MMC Receive” or “MTC Slave” is selected in [MIDI].
*6:
Transmitted when “MTC Master” is selected in [MIDI].
*7:
Received when “MTC Slave” is selected in [MIDI].
*8:
Transmitted when “MIDIClockMaster” is selected in [MIDI].
*9:
Received when “MIDIClock” is selected in [TEMPO]
“TempoTrk” to record the tempo.
*10:Only for D32XD
0 – 1000 – 100
To Next Page
Loading...
Need help?
General
