31
Quick Start
Step 1: PreparationsStep 2: Quick recordingStep 3: OverdubbingStep 4: Mixdown and
mastering
Selecting a master effect
(1)Press the EFFECT key and select the “MstrEFF1” tab page.
(2)Press the popup button beside the effect name, and the
Select EFF Category dialog box will appear.
(3)Press a category button in the LCD screen, and the Select
EFF Program dialog box will appear.
For this example press “Club” and then press the OK but-
ton.
If you want to go back and look in another category, press
Cancel button.
Adjusting the Master Effect 1 Send amount for each track
(1)Press the INTERNAL 1 key located beside the SEND
knob to display the “EFF1Send” tab page.
Alternatively, you can access this page by pressing the MIXER key, choosing
SEND (EFF/AUX [*/REC])
, and selecting the “EFF1Send” tab page.
(2)Select how the audio signal will be sent to master effect 1.
You can choose to send either the pre-fader signal (PRE) or the post-fader sig-
nal (POST) to master effect 1.
Press the PRE (PST) button located above the knob icon to make your choice.
For this example, select “PRE” for all tracks that will be using master effect 1.
(3)Adjust the send amount of each track.
Press the SEND knob icon, and turn the SEND knob located to the right of
the LCD screen to adjust the send amount for that track.
(3)
(1)
(2)
(1)
(3)
(3)
Pan
Send
From the EQ output of
each channel/track
Master bus
Master
Effect 1
Pre-fader
Post-fader
(1)
(2)
(3)
(3)
Step 4: Mixdown and
mastering
To Next Page
Loading...
Need help?
General
