Korg DSS-1 - Page 117

■ When you edit the sound start point, the sound length
becomes the actual sound length minus the sound
start.
(SOUND LENGTH) = (ACTUAL LENGTH) - (SOUND START)
“Sound start” does not change when you edit
“sound length”. The sum of the two is less than or
equal to the actual sound length.
(SOUND START)+(SOUND LENGTH) ^ (ACTUAL LENGTH)
Actual length is the length displayed when you get a
sound with Ft. The initial values are 000000 for
sound start, and the actual sound length for the
sound length.
!2J Using the auto repeat on/off function.
Operation
CO; Confirm that the EDIT SA M P LE mode is
selected (so its LED is illuminated).
Operation of DSS-1
• Indicates EDIT SA M P LE mode.
rwT Sample
o t
On
0 .) Press key 3. The selected function is confirmed
on the display.
3
Press
The display shows the current status of this function.
r
TRUNCATE
S0000U0
1 0 0 0 0 0
117!
EDIT SAMPLE MODE