■ When using the ten number Keys (10-Key pad) to
select a program, be sure to always enter the number
as two digits. That is, program numbers one through
nine must be specified as 01, 02, 03, and so on.
• Example: To select program number three.
Press
Then press
a
If you input an “illegal*1 number such as 00 or 34,
then the DSS-1 ignores the second digit and keeps
waiting until you enter a second digit that is a valid
program number. In this case you can return to the
previously selected program number by pressing the
DELETE/CANCEL key.
• Example: If you try to select number 34.
The second digit is ignored and the
DSS-1 keeps waiting for valid input.
The previously selected
program name remains
in the readout.
j
t
DEL/CANCEL
You can stili press
To return to the previously selected program number
i
■ It takes about half a second after selecting a program
until that patch can actually be played.
To Next Page
Loading...
