Korg DSS-1 - Page 211

F19 AUTO BEND TIME & I NT
1 The auto bend time & intensity function.
■ Lets you adjust the amount of pitch change and the
rate at which it occursJ in relation to the auto bend
mode (F18) settings for mode and polarity,
• Time:
Determines the slope of pitch change. The shorter
the time, the steeper the slope.
• Intensity:
Determines how high or low above normal pitch the
bend wilt start.
[2] Using the auto bend time & intensity function.
■ Press 1 then 9, or use DATA ENTRY A to select the
AUTO BEN D TIM E & INTENSITY function.
■ Use the cursor keys to select a parameter. Then use
DATA ENTRY B to adjust its value.
Possible time values
00 3I
Pitch
Possible intensity values
000— I 21
Pitch
Shows auto bend time and intensity function
______________ j _ ______ _____
F 19 HU1U BEND
INT-983 TIME=01
Intensity value.
Time value
211
PROGRAM PARAMETER MODE