PROGRAM PARAMETER MODE
F18 AUTO BEND MODE,
tjThe auto bend mode function
■ This function controls pitch bends produced automat
ically when keys are played. Pitch starts at a point
above or below the normal key pitch and bends to
reach the normal key pitch. This is useful for human
voice and some brass instrument effects*
• Mode:
Lets you choose which, if any, of the oscillators will
be used for the effect.
Possible mode values
O FF, OSC I, OSC 2. Bü'f H
• Polarity:
Selects whether the pitch will bend down or up to the
normal note pitch.
Possible polarity values
DOWN, UP
Pitch
[ Using the auto bend mode function.
■ Press 1 then 8, or use DATA EN TRY A to select the
AUTO BEN D M ODE function.
Auto bend mode display.
..
.
.
J
___
F IS RUTO BEND
M0DE=BGTH POL.=UP
T
J L
Mode setting.
T
Polarity setting.
■ Move the cursor to the parameter that you want to
change* Then use DATA EN TR Y B to change the
value.
To Next Page
Loading...
