PROGRAM PARAMETER MODE
2; Using the VCF resonance & keyboard tracking
function.
■ Select the function by pressing 33 on the number
keys or by moving the DATA ENTRY A slider.
■ Move the cursor to the parameter that you wish to
change. Then use DATA EN TRY B to adjust its value.
Display for VCF resonance & keyboard tracking function
Resonance value Keyboard tracking value
F34 VCF MG MOD
ijThe VCF modulation mode function.
■ This lets you modulate the V C F cutoff frequency to
create wah-wah and related effects in which there is
a regular variation in the sound's timbre. There are
three parameter values that may be adjusted.
* Frequency: Passible frequency values
Controls the speed of the filter modulation effect. j
---------
....
00-83
• intensity:
Controls the depth of the modulation, that is the
amount of change in the cutoff frequency.
Possible intensity values
00 -6 3
• Delay:
Determines the delay before the onset of the effect
after a key is played.
Possible delay values
0Û--63
Brightness
Time
To Next Page
Loading...
