Korg DSS-1 - Page 218

PROGRAM PARAMETER MODE
Envelope output
• Break point level:
Sets the level at which the decay time ends.
• Slope time:
Controls how long it takes for the envelope voltage to
change from the break point level to the sustain level.
The greater the value, the more gradual the tonal
change (assuming that there ra a difference in level
between break point and sustain.)
* Sustain level:
Sets the (voltage) level at which the slope time ends.
• Retease time:
Determines the length of time that the sound con
tinues to change after you release a key. The greater
the value, the more gradual the change (assuming
that the sustain level is high enough that there will be
a change.
A " -
High break point level value
^ Low break point level value.
. I l f —
—^
Envelope output
Decay time
Time
Small slope time value
Large slope time
value
L ___ L
Sustain level
Time
Envelope output
f
High sustain level
\ /
~.L
' \ is
: ' r
I V
I \
I
T
Low sustain level
Time
Envelope output Slope time
2j Using the VCF EG Function
■ Press 3 then 5, or use DATA EN TR Y A to select the
function.
■ Use the cursor keys to select a parameter. Use DATA
ENTRY B to adjust its value.
Display for the VCF EG function
I
Attack time,
Decay time.
Slope time.
Sustain level.
Break point level
Release time.
1218