Korg DSS-1 - Page 219

VCA FUNCTION GROUP
F36 through F38 are the DSS-1 VCA control functions. The voltage controled amplifiers
(VCA) are used for control of the volume of the sound from VCF.
F36 VCA TOTAL LEVEL
;ij The VCA total level function.
■ Determines the overall volume level of the sound in a
particular program. Since this value is stored along
with the rest of each patch, you can use it to avoid un
desirable volume variations when you change
sounds.
|2] Using the VCA total level function.
■ Select the function by pressing 3 then 6 on the
number keys or by moving the DATA EN TR Y A slider.
■ Use DATA EN TRY B to adjust the value.
Possible VCA total level values.
00 -63
Display for VCA total level function.
t ___________
F7-.& imp
TOTAL LEUEL
= 5u
Total level setting.
F37 VCA DEC KBDTRACK
i] The VCA decay keyboard tracking function.
■ This lets you make the VCA EG decay time get pro
gressively longer or shorter in proportion to keyboard
pitch.
For example, if you want to replicate guitar or piano
decay characteristics then you would choose a value
(above 0) that would cause a shorter decay at higher
notes.
Possible VCA decay keyboard tracking values.
6 3 - 0 - 6 3
Decay
H LI I
keyboard tracking.
/
(Values 0 to 63)
(Values - 63 to 0)
A
\
i219
PROGRAM PARAMETER MODE