Korg DSS-1 - Page 229

F53 VCA TOTAL LEVEL
I ij The VCA total level function
■ This lets you use afteMouch to control VC A total
level. Higher values allow control to begin from lower
levels*
00 15
Possible VCA total level function values.
Level
Hard.
2 ] Using the VCA total level function Display tor VCA total function.
■ Press 5 then 3, or use DATA EN TRY A to select the i ------- ----- --------------~ ~
function.
■ Adjust the value by moving DATA ENTRY B.
JOY STICK FUNCTION GROUP
The DSS-1 joystick can be used to control a variety of effects. F61 and F62 let you adjust
parameters for pitch bends and filter sweep.
F53 UGH HFT TOUCH
TOTAL LEUIEL = On
m. —
Total level value
F61 PITCH BEND RANGE
FI1 About the pitch bend range function
■ This sets the range of pitch change produced when
the joystick is moved left and right. It can be set in
semitone steps up to a maximum range of one octave
up and down.
Possible pitch bend range values
DÛ-12
229
PROGRAM PARAMETER MODE