2 Use DATA ENTRY A to select the system letter
(A, B, C p D) under which you wish to save the
system that currently resides in memory.
DATA EN TR Y A
F
y
i
Use to select
the system letter
T
Shows the selected system
-I
■3' Press EN TER to proceed.
EN TER
«—s i * -
Press
• You are asked to confirm whether it is okay to save
the system in memory to disk under the system letter
displayed. Shorn the displayed system.
t
'£) Reply by pressing the Y E S or NO key.
★ If you wish to save the system to that disk as the
selected system letter, then press YES*
Press
After saving, you can choose another function or
change modes.
F
*m w h a
t h a y i n g . .. □
Please Ida it a Minute
Sh o w s the saved system.
F2 SVSTEM!H bayed
Select <1-9>:
....
1
Shows you can select a function.
2451
SYSTEM MODE