Korg DSS-1 - Page 69

|2] Sample number and memory division function procedures.
A. Memory division setting/how to change.
Operation
O' Confirm that the SA M PLE mode is selected and
that you have completed the INITIAL opera
tions (detailed in the previous section starting
on page 61).
Press key number 1 in the 10-key pad. This
selects the sample number/memory division
function.
Press
2j Confirm that the cursor is on the memory divi
sion side of the display. If it isn't then press the
Y E S cursor key to move it to the right.
VE5
Press
Operation of DSS-1
When in the sample mode.
S I /
On
You are shown the currently selected sample number
and memory division. (These default to sample num
ber 01 and memory division 01 when the power is
turned on.)
Shows sample number and memory division setting,
Sample number Number of memory divisions,
Memory division can now be set.
Fi SMPL-ND. MEM.DIU
n 1 h 1
t
Shows the cursor,
SAMPLE MODE