Korg DSS-1 - Page 90

CREATE WAVEFORM MODE
—
(3) Play the sound on the keyboard and decide
whether to keep the wave or try again.
Press Press the Y E S key to draw the wave again. This
takes you back to step z , above.
* Press the NO key if you want to keep the wave
and go ahead.
Press
• If you press NO to keep the wave then the display
asks whether you want to edit the waveform.
■© Press the Y E S key if you wish to edit the
waveform that you have drawn.
Press
You get the display for waveform editing.
The top tine shows the address and the level at that
address in memory.
The bottom line tells you to use the cursor keys and
the DATA EN T RY A and B controls.
Show s the address.
Shows the level at that
address in memory,
„ ____ t ____ .
fiDDR=000sLEUEL=“2048
Use < > D.ENTRV fl&B
/Possible AD DR (address) values: 000 - 511 \
\Possible LEV EL values: -2 0 4 8 ~ +2047 f
90