2. Pick a Program Bank to contain the sequence of programs
(for example, Bank 4).
3. Since you don’t want program '-!! in your sequence, copy
it into the “free” location (S'-!) as described above. This
opens up Program Number '•!! for the first program that
you DO want.
4. Copy program '-!,? into ■-!!. This opens up location .
5. Copy program SS into '-!■? . This opens up SS •
6. '-!:! is full, but it’s not what you want. Copy to SS. then
copy 13 to '-!;!. Now, '-13 is what you wanted, the OLD pro
gram in '-!3 is safe in 5 5 , and 13 is open for further moves.
7. Continue this process by moving '-!■-; to 13, 13 to '-!'-! ,
'-IS to !3 , I ! to '-!S , and '-!S to !! , and 83 to '-!S.
Now, the six programs you wanted are all in Bank 4, in the
proper order — and the six programs that were there be
fore are safe, but scattered all through Program Memory.
If you like, you can keep on in this manner until every pro
gram is exactly where you want it to be.
• After all programs have been moved as desired, return the
rear panel WRITE switch to the DISABLE position.
• You can use the Tape Interface to save many different ar
rangements of programs, for different songs or sets of songs.
• Once the programs are organized in this way, you can use
the PROG UP footswitch to easily move through the
programs.
26
To Next Page
Loading...
Need help?
General
