- 8 -
But first, you must change the “Convert Position” (2.1-1a) [MIDI] Convert
Position -> Post MIDI. ☞ Parameter Guide, Page 138.
When Convert Position is “Pre MIDI”, the curve applies to the Karma’s
keyboard, and data from an external keyboard uses curve 4. When
Convert Position is “Post MIDI”, the external keyboard uses the selected
curve, and the Karma keyboard uses curve 4.
Try one of the higher number curves with your other keyboard.
Alternately, most keyboards have this sort of adjustment, and you could
try a different curve on the transmitting keyboard, rather than the
Karma.
13. When upgrading your OS, do you have to go in sequence (eg.
1.01, 1.02, etc.) or can you skip to the most recent?
You can go directly to the latest update, without performing the ones in
between. Whichever OS you load will be the one that your Karma is
running. You get the benefit of all the updates in between.
14. My Karma came with different PRELOAD Combis than in the
Documentation! I think the documentated Combis are on the
Disc which came together with Karma.
From your e-mail address, it seems you are in Germany. In Europe,
many of the distributors released the Karma with a re-ordered version of
the Combis. In other words, same Combis, different order. They felt they
wanted to put more dance-oriented Combis first.
You can use either order, but if you want it to match the Voice Name List
documentation, you should use the original order, on the Factory Preload
Disk. You could save the current order to disk first, and then you will
have both. Or, see:
http://www.korg-karma.de/ -> Updates -> Factory Presets
15. Is there a way to adjust the darkness of the display?
Sometimes it seems a bit whispy or too dark.
I’ve noticed that the display contrast seems to change a little bit,
depending on how long the unit has been turned on. In any event, you
can adjust the amount of “darkness” to the pixels by changing the
contrast setting in Global (1.1-2) [Prefs]. ☞ Parameter Guide, Page 136.
To Next Page
Loading...
Need help?
General
