Korg Krome

EnglishFrançaisDeutschEspañol
About the display and the modes
En-9
About the display and the modes
Display
TheKROMEusesKorg’sTouchViewgraphicaluser
interface.
Bypressingordraggingobjectsshowninthedisplay,
youcanselectprogramsorcombinations,oredit
parametervalues.Herewe’llexplainthenamesand
functionsoftheseobjects.
a: Mode button
Thisindicatesthecurrentlyselectedmode.
Whenyoupressthisbutton,theModemenuwill
appear.Inthemodemenu,pressthenameofthemode
thatyouwanttomove.Ifyouselectthecurrently
selectedmode,thePageSelectmenuforthatmodewill
appear.Eveninanothermode,pressingtherightside
ofthenamewilldisplaythePageSelectmenuforeach
mode.
Toclosethemenu,presstheClosebuttonortheEXIT
button.
Youcanalsochoosemodesandpagesbypressingthe
frontpanelbuttons.Pressamodeselectbuttonto
selectamode,andthenpressthePAGEbuttonto
accessthepagesel
ectscreen.
b: Current page
Thisindicatesthecurrentpagewithintheselected
mode.
Beginningattheleft,thisareashowsthepagenumber:
name,andtabname.
c: Tab
Mostpagesaredividedintotwoormoretabs.
d: Parameters
Theparametersforvarioussettingsareshowninthe
display.Selectaparameterinthedisplay,andeditits
value.
YoucanusetheVALUEdialandothervalue
controllers(seepage 6)toeditavaluebydragging
yourfingerinthedisplay,orturnasettingon/offby
pressingitinthedisplay.
Forsomeparameters,
youcanpresstheparameter
twiceinsuccessionorlong‐pressandthenreleaseitto
accessanon‐screeneditpadwhereyoucaneditthe
value.see“Editpad”onpage 6oftheOperation
Guide.
e: Popup buttons
Whenyoupressapopupbutton,theavailable
parametervalueswillappearasapopupmenuora
tabbedmenu.
f: Menu command button
* Menu
Whenthisbuttonispressed,alistofmenucommands
willappear.
Themenucommandsthatappearwilldiffer
dependingonthepagethat’scurrentlyselected.
Themenuwillclosewhenyoupressthedisplay
somewhereotherthanthemenu,orwhenyoupress
theEXITbutton.
* Dialog box
Whenyouselectamenucommand,you’llseeascreen
containingthesettingsneededtoexecutethe
command.Thisiscalledadialogbox.Thedialogbox
thatappearswilldependonthemenucommandthat
youselect.Somecommands,suchasExclusiveSolo,
donotdisplayadialogbox.
* Text edit button
Whenyoupressthisbutton,thetexteditdialogbox
appearsforchangingthenamesofPrograms,
Combinations,Songs,etc.
a: Mode button
b: Current page
c: Tab
d: Parameters
e:
Popup
buttons
f: Menu command button
Mode button Page number: name
Tab name
Menu command button
Menu button
Text edit button
Cancel button OK button