2
KORG Pa1X – Operating System release 2.52
Control Panel
Control Panel
Variation/STS Link controlled by the Single
Touch button
The “Variation/STS Link” is a function that makes each Varia-
tion recall the corresponding STS when selected. For example,
select Variation 2, and STS 2 is automatically selected; select
Variation 3, and STS 3 is automatically selected.
This function is no longer available as a parameter. Instead, it is a
new status of the SINGLE TOUCH button. Repeatedly press this
button to make its LED flash, and turn this function on.
Here is the meaning of the SINGLE TOUCH LED status:
Off Not activated.
On Single Touch function activated.
Flashing Variation/STS Link function activated.
Various Modes
Volume Link
If you keep the SHIFT button pressed, while the Upper, Style or
Song tracks are shown in the display, you can move just one of
the sliders to proportionally change the volume of all similar
tracks.
• Keep SHIFT pressed and move one of the sliders control-
ling the volume of one of the Upper tracks, to proportion-
ally change the volume of all Upper tracks at the same time.
This works in Style Play and Song Play mode.
• Keep SHIFT pressed and move one of the sliders control-
ling the volume of one of the Style tracks, to proportionally
change the volume of all Style tracks at the same time.
This
works in Style Play mode.
• Keep SHIFT pressed and move one of the sliders control-
ling the volume of one of the Song tracks, to proportionally
change the volume of all Song tracks at the same time.
This
works in Sequencer mode.
Lower track held when changing Perfor-
mance or STS
If you keep a chord held in the Lower area of the keyboard, then
select a different Performance or STS, the Lower sound is not
stopped until you release your hand from the keyboard.
Note:
The above is not true, if the Performance or STS changes the
Lower track’s Octave Transpose.
In SongBook and Disk mode, touching a
label selects a different list order
While in a Disk or SongBook page, showing a list of files or
entries, you can touch one of the heading label above the list to
change the list’s order. For example, by touching the “Name”
label in a SongBook list, the list is alphabetically re-ordered
according to the file names. The selected label turns red, showing
the currently selected ordering.
The corresponding items in the page menu are automatically
updated to reflect these changes.
Start/Stop, Play/Stop Seq 1, and Play/Stop
Seq 2 commands simulated via Midi
You can remotely control the Style Start/Stop, Seq 1 Play/Stop
and Seq2 Play/Stop commands via MIDI, by sending the Pa1X
the following Program Change messages on the Control MIDI
channel.
To program a MIDI channel as the Control channel, go to the
Global > MIDI > MIDI IN Channels page.
Note:
The above Program Change numbers are given according to
the 0-127 numbering system.
Copy FX between Styles, Performances,
STSs and Songs
You can copy a single, or all four effects, between Styles, Perfor-
mances, STSs and Songs. To do this, choose the “Copy FX” and
“Paste FX” commands from the page menu of the Style Play,
Song Play or Sequencer modes.
To copy a single effect:
1.
Select the source Song, Performance, Style or STS, then
• go to the page of the single effect you want to copy (FX A,
FX B, FX C, or FX D),
or
• go to the Effects > FX Select page, to copy all four effects.
This may be useful if you want to copy each of the four
effects into different Performances, Styles or STSs.
2.
Choose the “Copy FX” command from the page menu.
PC# Function
99 Start/Stop (Style)
100 Play/Stop (Sequencer 1)
101 Play/Stop (Sequencer 2)
To Next Page
Loading...
