4
KORG Pa1X – Operating System release 2.52
Song Play Mode
which they are played depends on the current sorting method,
i.e., how the files are shown in the display.
You can use this Jukebox list as any other list of this type (i.e.,
start the playback with SEQ1 PLAY/STOP, jump to the next Song
in the list with SHIFT + >>, edit it in the Jukebox page…).
Note:
A Jukebox list can include up to 127 Songs. If your folder con-
tains more items, only the first 127 will be considered.
Hint:
If you don’t want to lose the list when turning the instrument
off, go to the Jukebox page and save it to disk as a “.JBX” file.
Lyrics loaded as ".Txt" files can be scrolled
with the Dial
While in the Lyrics page, lyrics loaded as a “.TXT” file can be
scrolled using the Dial. This is not possible with other types of
lyrics, since they are already synchronized to the Song.
Song Markers
Standard Song Markers contained in a midifile can be read with
the Pa1X, to quickly jump to a given position in the Song. Addi-
tionally, you can set your own marker points on-the-fly.
Two side tabs have been added to the “Lyrics” page (now “Lyrics
& Markers”) of the Song Play mode.
Note:
Markers do not work when the Groove Quantize is activated.
Note:
It is not advisable to use them with a Jukebox file assigned to
Sequencer 1, since pressing PLAY/STOP would delete the markers.
How to add a marker:
1.
Go to the Song Play > Mark Seq.1 (Seq.2) page.
2.
Start the Song by pressing the SEQ.1 (SEQ.2) PLAY/STOP
button.
3.
When you reach the position you want to save as a marker,
press the Add button in the display.
• If you press Add within the first beats of the measure, the
beginning of the current measure is saved as a marker.
• If you press Add within the last beat of the measure, the
beginning of the followng measure is saved as a marker.
4.
Do the same for any following marker.
5.
Stop the Song by pressing the SEQ.1 (SEQ.2) PLAY/STOP
button.
How to jump to a saved marker:
1.
When you want to jump to a saved marker, touch it in the
display. The Song will jump to the saved position at the
beginning of the next measure.
How to edit a marker:
1.
Touch the marker to be edited in the display.
2.
Press the Edit button in the display to set the marker to
edit. The Edit Marker window will appear.
3.
While in Edit Marker window, you can edit the name and
position of the marker being edited.
How to delete a marker:
1.
Touch the marker to be deleted in the display.
2.
Press the Delete button in the display to delete the selected
marker.
How to save the markers:
From the page menu, choose the “Save Song Marker Seq.1” or
“Save Song Marker Seq.2” (depending on the sequencer where
you created the markers). The markers will be saved into the
midifile.
Auto Scroll
Check this parameter if you want the current marker to be
always visible in the display during playback, by making the list
of markers scroll automatically.
Don’t check this parameter, if you prefer to prevent the list from
scrolling. This is useful if you want a marker to remain in the
display, ready to be selected as soon as you want to jump to its
position, with no need to scroll the list to catch it out.
To Next Page
Loading...
