Korg Pa5X - Page 139

PlayingtheStyles |129
Choosing a Variation to play a Verse or Chorus
Variations can be used for verses, choruses, bridges or specials. To choose the
right Variation for your verse, please note that Variations are of growing ‘density’
and ‘loudness’. This means that Variation 1 will be the ‘sparsest’ and the ‘quietest’
of the arrangements, while Variation 4 will be the ‘densest’ and ‘loudest’ of them.
Usually, you will use Variation 1 for the rst verse, Variation 4 for the last chorus.
Style Element Suggested use
Variation1 Verse,Bridge,ChorusorSpecial(lowestdensity)
Variation2 Verse,Bridge,ChorusorSpecial(medium-lowdensity)
Variation3 Verse,Bridge,ChorusorSpecial(medium-highdensity)
Variation4 Verse,Bridge,ChorusorSpecial(highestdensity)
> Wait for the Intro to end playing, and then the selected Variation will start
playing. The selected VARIATION indicator will stay lit.
> As an alternative, you can start the Variation before the end of the Intro. While
the Intro is playing, press one of the VARIATION buttons. The Variation will start
at the next measure.