Korg Pa5X - Display Hold

DisplayHold |43
Display Hold
You may prefer to leave a Select window open after you have done your choice,
maybe to continue trying other elements in that window. Or, you may prefer to let
it automatically close after you have completed your choice. This depends on the
Display Hold parameter.
Here is how to turn the Display Hold parameter on or o.
1 Go to the Settings > Menu > General Controls > Interface page.
2 Turn the Display Hold parameter on or o:
> Select the On checkbox to turn it on. All Select windows will remain open on
the display, until you press the EXIT button.
> Deselect the On checkbox to turn it o. All Select windows will automatically
close after you have chosen an element.
3 Press the EXIT button to return to the previous page.