InstallingamicroSDcard |415
Installing a microSD
card
To expand the available onboard storage memory, you can install an (optional)
microSD card. The card can be installed by the user. Do not use types of cards
other than the one indicated (microSD), or you risk to damage the instrument!
You can use both slots, but we recommend to prefer the upper one for storing your
data, since it is a high-speed slot.
The card must be in the FAT32 format. You can format it on a personal computer.
On a Mac, use Disk Utility. In Windows, you can format a 32GB card (or smaller)
with the internal utilities; for larger cards, you can use the third-party FAT32
Format utility.
Precautions
> Installation of the microSD card is done at the user’s own risk. KORG will as-
sume no responsibility for any data loss, damage or injury resulting from its im-
proper installation or use.
> Be sure to disconnect the instrument from the AC plug, before opening it.
CAUTION: Removing or inserting the microSD card while the instrument is con-
nected to the AC plug may damage the instrument and the card!
> To prevent your body’s static electricity from damaging the board’s compo-
nents, touch an unpainted metallic component before proceeding with the instal-
lation.
To Next Page
Loading...
Need help?
General
