Korg Pa5X - Powering up; Turning the instrument on

14| Let’sstart!
Audio outputs
Use the LEFT/RIGHT sockets to send the stereo audio signal to a mixer, a PA sys-
tem, a set of powered monitors, or your hi- system. Four separate audio outputs
(1-4) are also available. (See Connecting the audio outputs on page 20).
Pedal connectors
Use the DAMPER connector to connect a damper pedal, and the ASSIGNABLE
connectors to connect either a continuous pedal or footswitch.
MIDI ports
Use these ports to connect Pa5X to external controllers (master keyboard, MIDI
guitar, wind controller, MIDI accordion, MIDI pedalboard…), to a series of expand-
ers, or to a computer with a MIDI interface.