Korg Pa5X - Page 317

TheMixer |307
Checking which Sounds are playing
In the lowest area of various pages, an indicator shows which Sounds are playing.
This lets you see the source of the audio signal. When mixing, you can mute or
solo the various channels, and see each Sound’s contribution to the overall mix.
Color Sound
Green KeyboardorPad
Orange StyleorSongfromPlayer1
Blue StyleorSongfromPlayer2
Metering the audio levels
While in the Mixer/FX edit section, a stereo level meter is always visible in the
lower right side of the display.
Keep an eye on it while adjusting the volume and EQ levels, or the internal level
of the eects. The color of the bars will warn about the risk of overloading and
distort the nal audio outputs.
Color Meaning
Green Audiolevelisne.
Yellow Audiolevelisne,butitisrunningnearthemaximum.Becarefulwhen
increasingthelevelofthechannelvolumeoranEQband,ortheinternal
volumeoftheeects.
Red Theaudiooutputisbeingoverloaded.Ifthishappensoccasionallyonshort
peaks(likeapercussionhit),itmaystillbene.Ifitremainstoolonginthe
red,lowerthechannelvolume,orndtheoendingEQbandoreectlevel.