Korg Pa5X - Page 325

TheMixer |315
Soloing and muting the Sounds
You can solo or mute the Sounds. Soloing can be useful to check how something
sounds in isolation. Muting can be used to remove a Sound from a mix, either to
check the nal eect, or to replace it with a live player.
Muting from the control panel
1 Use the mode buttons in the CONTROL section to select the groups of Sounds
to control. By default, the MAIN group is selected. Here you can mute the audio
inputs and the voice eects, but not the internal Sounds.
2 If you want to mute the Sounds of a Style or a MIDI Song, press the STYLE/
SONG mode button in the CONTROL section.
3 Press the STYLE/SONG button again to cycle between Song Tracks 1-8 and
9-16.