Korg Pa5X - Page 332

322| TheMixer
Equalizing the Sounds
Pa5X includes three-band channel equalization (EQ) on each individual mixer
channel. Each Sound can be individually equalized.
The equalizer is a powerful tool to shape your sound. Be careful not to overdo,
since excessive boost can overload the audio outputs and distort the sound.
Sometimes, it is better to attenuate a band instead of boosting it, to make other
sounds emerge through the mix.
Adjusting the EQ gain
1 Go to the Home > Menu > Mixer/FX > EQ page. You can also access this sec-
tion from the Style/Song Edit > Menu.
2 Keep the EQ Gain knob held on the screen, and move it to the desired level.
As an alternative, use the DIAL or UP/DOWN controls to change the value of the
selected knob.
EQ Gain Meaning
HF (High Frequency)
-18…+18dB Highfrequencyequalization.Thisisashelvingcurvelter.
MF (Middle Frequency)
-18…+18dB Middlefrequencyequalization.Thisisabellcurvelter.
LF (Low Frequency)
-18…+18dB Lowfrequencyequalization.Thisisashelvingcurvelter.