Korg Pa5X - Page 361

Connectingamicrophone |351
▪ Adjust the gain
1 Use the GAIN knob next to the MIC INPUT connector to adjust the input gain
(from +20 to +55 dB).
2 Sing into the microphone.
3 Check the input level in the Settings > Menu > Mic Setup > EQ/Dynamics
page.
AUDIO IN color Meaning
O Nosignalentering.
Green Low-tomid-levelsignalentering.Iftheindicatorturnsotoooften,the
inputgainistoolow.UsetheGAINcontroltoincreasetheinputlevel.
Yellow Slightoverloadinthesignalpath.Thisisneifitturnsononlyonsignal
peaks.
Red Clippingisoccurringinthesignalpath.UsetheGAINcontroltolowerthe
inputlevel.
Keep the level so that this indicator remains green most of the time, with yellow
appearing at signal peaks. Never go to red.