Usingthemicrophoneeectsandharmonization |373
Turning harmonization on or o
1 Press the MAIN button in the CONTROL section.
2 Check in the strip display the functions assigned to the buttons. If they are
not shown, press the VIEW button in the CONTROL section to see them.
3 Use BUTTON #2 (Mic Harmony On/O) to turn on/o the Harmony eect.
As an alternative, use the Harmony On/O command you can nd in the Home >
Control page (with the Main view mode selected).
You can also turn it on/o from the Home > Mic & Guitar pane.