10
KORG Pa800 – Operating System release 1.60
Sound Mode
Exit from Step Record Mode without
saving
When choosing the Exit from Record command from the page
menu, while in Overdub/Overwrite Step Record mode, a dialog
box allows you to either cancel, discard or save the changes.
Cancel Exit is canceled, and you can continue editing.
No Changes are not saved, and the Step Record win-
dow is closed.
Yes Changes are saved, and the Step Record window
is closed.
Sound Mode
Reverse options editable on RAM Drum
Samples
While in the Sound > DrumKit > Sample Setup page, the
Reverse option can be selected when a RAM Drum Sample (i.e.,
an imported Sample) is assigned to the current Key and Layer.
This function is immediately available to new samples (i.e., those
created with OS version 1.60). To make it available to existing
samples, you must follow this procedure:
1. Load the .SET folder containing the old samples.
2. Go to Sampling mode.
3. From the Record page, choose the existing sample to con-
vert.
4. Without any editing, choose from the page menu the Write
command, and save the sample over itself.
5. In case the sample is stereo, please don’t forget to convert
both the L(eft) and R(ight) side of the sample.
Pa800-160UPG-EFGI.book Page 10 Wednesday, March 19, 2008 7:15 PM
To Next Page
Loading...
Need help?
General
