Korg TMR-50 User Manual

33
When the recorder is stopped or while
recording, tuning is performed on the input
from the INPUT jack or the internal mic.
When the recorder is being used for playback
(including loop playback), tuning is performed
on the playback sound for the track.
Tuning is not performed when the recorder is
in record-standby mode, during the precount
or while a track is being deleted.
The tuner procedures are the same as when
it is used individually. Please refer to the
“Using the tuner” section on page 16 and the
“Using the recorder and tuner simultaneously”
section on page 27 .
About metronome operations
The metronome pendulum will not appear
on the display since the tuning meter will
appear on the display.
All other operations and procedures are
the same as when the metronome is used
simultaneously with the recorder. Please refer
to the “Using the metronome” section on page
19 and the “Using the recorder and metronome
simultaneously” section on page 28.
About recorder operations
With the recorder, a tempo-synchronized track
can be recorded by using the same procedure
as when it is used simultaneously with the
metronome.
For more details on the operations and
procedures, please refer to the “Using the
recorder and metronome simultaneously”
section on page 28.
Deleting a track
A track can be deleted by using the same
procedure as when the recorder is used
individually. (Page 26 “Deleting a track”)

Korg TMR-50 Specifications

General

Brand	Korg
Model	TMR-50
Category	Recording Equipment
Language	English