DRIVE/AMPCABINETPRE EFFECT
MODULATION
DELAYREVERB Effect Type Tuner
27
3. ACOUSTIC
This uses the acoustic guitar modeling technology of the ToneWorks AX10A, con-
verting the sound of an electric guitar into the sound of an acoustic guitar.
HINT:
Single-coil pickups are recommended for best results.
4. VOX WAH
This is a detailed simulation of two legendary VOX wah pedals; the V847 and the
V848. You can use the CLOSE and OPEN knobs to adjust the tone when the pedal
is closed and open, giving you a wide range of tonal variation.
HINT:
If you select VOX WAH, the expression pedal will automatically be assigned
to the MANUAL knob.
[4] “TYPE” OFF, H-S, S-H Selects the pickup conversion model.
OFF: Pickup conversion will not be per-
formed.
H-S: Single-coil sound will be transformed
into humbucking sound.
S-H: Humbucking sound will be transformed
into single-coil sound.
[5] “LEVEL” 0.0–10.0 * Adjusts the output level.
[1] “BODY” 1.0–10.0 * Adjusts the low-frequency tone.
[2] “TOP” 1.0–10.0 * Adjusts the high-frequency tone.
[4] “TYPE” 1, 2, 3, 4 Selects the body type.
1: M-SMALL An old-style small body, suit-
able for detailed arpeggios
2: G-SMALL A small-size body with a dis-
tinctive mid-range, favored by
country and blues players
3: T-LARGE A large body characterized by
a refined sound, suitable for
pop.
4: RESO The body of a resonator guitar,
suitable for slide playing
[5] “MIX” 0.0–10.0 * Adjusts the mix amount of body resonance.
[1] “CLOSE” 1.0–10.0 Adjusts the tone when the wah pedal is
closed (pedal back).
[2] “OPEN” 1.0–10.0 Adjusts the tone when the wah pedal is
open (pedal forward).
[3] “MANUAL” 1.0–10.0 * Adjusts the openness (position) of the wah
pedal.
[4] “TYPE” 847/848 Selects either V847 or V848 as the wah
type.
[5] “ORDER” PrE(PRE)/
PoS(POST)
Selects the connection order. PRE/POST
connects the wah before/after the Amp
Model.
To Next Page
Loading...
Need help?
General
