EasyManua.ls Logo

Korg ToneWorks AX3000G - MOD (Modulation) Effects

Korg ToneWorks AX3000G
67 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
D. MOD (MODULATION) EFFECTS
Here you can select one of 11 modulation-type effects.
*: This indicates a parameter that you can control from the expression pedal.
1. CLASSIC CHORUS (CL CHORS)
This models a chorus unit that has two modes (chorus and vibrato), and is best-
known for being built into a guitar amp.
2. MULTI TAP CHORUS (MT CHORS)
This is a chorus with independent taps for left/center/right, adding depth and spa-
ciousness to your sound.
3. CLASSIC FLANGER (CL FLANG)
A model of a truly classic analogue flanger that “unchained” a highly influential
modern guitarist who many hail as the “godfather of two handed tapping.
[1] “DEPTH” 0.0–10.0 * Adjusts the modulation depth.
[2] “SPEED” 0.1–10.0[Hz] * Adjusts the modulation speed.
[3] “MANUAL 1.0–10.0 * Adjusts the center frequency of the sweep.
If DEPTH is set to 10, MANUAL will not func-
tion.
[5] “MODE” 1, 2, 3 Selects the output mode.
1: Mono output.
2: Stereo mode in which the effect is panned
right, and the dry sound panned left.
3: Vibrato mode, in which only the effected
sound is output. Setting MANUAL to 10 will
minimize the delay of the output.
[1] “DEPTH” 0.0–10.0 * Adjusts the modulation depth.
[2] “SPEED” 0.1–10.0[Hz] * Adjusts the modulation speed.
[3] “TIME” 0.0–10.0 Adjusts the delay time.
[5] “MIX” 0.0–10.0 * Adjusts the mix level of the effect.
[1] “DEPTH” 0.0–10.0 * Adjusts the modulation depth.
[2] “SPEED” 0.1–10.0[Hz] * Adjusts the modulation speed.
[3] “MANUAL 1.0–10.0 * Adjusts the center frequency of the sweep. If
DEPTH is set to 10, MANUAL will not func-
tion.
[4] “RESO” 0.0–10.0 * Adjusts the amount of resonance.
[5] “MIX” 0.0–10.0 * Adjusts the mix amount of the effect.
CONTROL switch
FLN TRIG If you set the FLN TRIG: CONTROL switch
setting to “FLN TRIG, the LFO will be reset
to the position specified by OFFSET when-
ever you operate the switch.
(p.43 Control
switch settings)

Table of Contents

Related product manuals