287
Appendices
CC#77: LFO1 depth (pitch LFO1 intensity)
Corresponds to “Pitch LFO1 Intensity” (Program P2:
OSC1/2 P.Mod page).
CC#78: LFO1 delay
Corresponds to “LFO1 Delay” (Program P5: OSC1/2
LFO1 page).
CC#79: Filter EG intensity
Corresponds to “Filter EG Intensity to A, B” (Program P3:
Filter 1/2 Mod. page).
Different parameters are controlled for the bank F pro-
grams that are available when the EXB-MOSS option is
installed. (☞EM)
*6Controlled on the global MIDI channel.
*7NRPN (Non Registered Parameter Number) and Data
Entry can be used to control the following parameters.
Arpeggiator on/off
[Bn 63 00 Bn 62 02 Bn 06 nn] (nn:00–3F off, 40–7F on)
Arpeggiator gate control
[Bn 63 00 Bn 62 0A Bn 06 nn] (nn:00–7F)
Arpeggiator velocity control
[Bn 63 00 Bn 62 0B Bn 06 nn] (nn:00–7F)
Valve Force on/off
[Bn 63 00 Bn 62 10 Bn 06 nn] (nn:00–3F off, 40–7F on)
Valve Force INPUT TRIM
[Bn 63 00 Bn 62 11 Bn 06 nn] (nn:00–7F)
Valve Force ULTRA BOOST
[Bn 63 00 Bn 62 12 Bn 06 nn] (nn:00–7F)
Valve Force TUBE GAIN
[Bn 63 00 Bn 62 13 Bn 06 nn] (nn:00–7F)
Valve Force OUTPUT LEVEL
[Bn 63 00 Bn 62 14 Bn 06 nn] (nn:00–7F)
*8Corresponds to the operation of the [VALUE] slider as a
controller in Program P0: “Program Select” or Combina-
tion P0: “Combination Select” is selected.
To Next Page
Loading...
