310
Drumsample “0413–0416” settings
• TRITON Extreme, TRITON STUDIO → TRITON-
Rack and TRITON(.PCG file load/MIDI data dump):
Since these multisamples do not exist on the TRITON-
Rack or TRITON, they will not sound/operate correctly.
2-3. Combination or Sequencer mode “Program Select” bank
H, I, J, K, L, M, N (EXB-A, B, C, D, E, F, G: TRITON
STUDIO) settings
• TRITON Extreme, TRITON STUDIO → TRITON
(.PCG file load/MIDI data dump):
Since these program banks do not exist on the TRITON,
they will not sound/operate correctly.
2-4. Program mode OSC1 Drum Kit “064(H) <E-D: TRITON
STUDIO>–143(User)” settings
• TRITON Extreme, TRITON STUDIO → TRITON
(.PCG file load/MIDI data dump/MIDI parameter
change):
Since these drum kit numbers do not exist on the TRI-
TON, they will not sound/operate correctly.
2-5. RAM sample parameter “+12 dB” setting
• TRITON Extreme, TRITON STUDIO → TRITON,
TRITON-Rack (.KSF file load):
Since the TRITON and TRITON-Rack do not have this
sample parameter, the “+12 dB” On setting will be
ignored. (As of November 2003)
[3] Parameters that are valid on the TRITON STU-
DIO but not on the TRITON Extreme
3-1. TRITON STUDIO Global mode parameters
Input (COMBI, PROG, SEQ, S.PLAY, DISK): “mLAN” settings
• TRITON STUDIO → TRITON Extreme
(.PCG file load/MIDI data dump):
The parameter settings are preserved by the TRITON
Extreme as internal data, but are ignored. If this state is
saved by the TRITON Extreme as a .PCG file or transmit-
ted via MIDI data dump, the data will be output with the
settings that were loaded or received.
System Clock: “mLAN,” “Word Clock” settings
• TRITON STUDIO → TRITON Extreme (.PCG file
load):
These parameter settings will not be loaded by the TRI-
TON Extreme.
S/P DIF Sample Rate
• TRITON STUDIO → TRITON Extreme (.PCG file
load):
This parameter setting will not be loaded by the TRITON
Extreme.
[4] Parameters that are valid on the TRITON-Rack
but invalid on the TRITON Extreme, TRITON
STUDIO and TRITON
4-1. Program mode Audition Riff and Transpose settings
• TRITON-Rack → TRITON Extreme, TRITON
STUDIO or TRITON (.PCG file load/MIDI data dump/
MIDI parameter change):
The parameter settings will be saved by the TRITON
Extreme, TRITON STUDIO or TRITON as internal data,
but will be ignored. When the TRITON Extreme or TRI-
TON saves this state as a .PCG file or performs a MIDI
data dump, the settings will be output in the condition in
which they were loaded or received via MIDI data dump.
• TRITON Extreme, TRITON STUDIO or TRITON →
TRITON-Rack
(.PCG file load/MIDI data dump):
These parameters will be set to “Off” and “+00” respec-
tively.
4-2. Program, Combination, and Multi mode REALTIME
CONTROLS [SELECT] C-mode settings
• TRITON-Rack → TRITON Extreme, TRITON
STUDIO or TRITON (.PCG file load/MIDI data dump/
MIDI parameter change):
Parameter C settings will be saved by the TRITON
Extreme, TRITON STUDIO or TRITON as internal data,
but this data will be ignored, and operation will use A or
B. When the TRITON Extreme, TRITON STUDIO or TRI-
TON saves this state as a .PCG file or performs a MIDI
data dump, the settings will be output in the condition in
which they were loaded or received via MIDI data dump.
4-3. Combination and Multi mode “Program Select” bank
EXB-A, B, C, D, E, F, G, H settings
• TRITON-Rack → TRITON (.PCG/.SNG file load/MIDI
data dump/MIDI parameter change):
Since the TRITON does not have these program banks, it
will not sound/operate correctly.
• TRITON-Rack → TRITON Extreme, TRITON
STUDIO (.PCG/.SNG file load/MIDI data dump/MIDI
parameter change):
Since the TRITON Extreme and TRITON STUDIO do not
implement program bank H, they will not sound or oper-
ate correctly.
To Next Page
Loading...
