314
[8] Data compatibility with other models
TRITON Extreme is able to load and simultaneously convert
.PCG/.SNG files that are in KARMA Music Workstation
(system version 1.0 and 2.0) format or TRITON Le format.
However, please note the following limitations and cau-
tions.
The combination and program categories may not be
appropriate.
Complete compatibility is maintained for the KARMA
Music Workstation’s .MID and .EXL files, and the TRI-
TON Le’s .KSC, .KMP., .KSF, .MID, .EXL, .AIF, and
.WAV files. These files can be loaded/saved via external
media.
.KGE files saved by KARMA Music Workstation system
version 2.0 are recognized as undefined DOS files and
will not be loaded.
8-1. Parameters that are valid on the KARMA Music
Workstation but invalid on the TRITON Extreme
KARMA function
Since the TRITON Extreme does not have a KARMA
function, KARMA function parameters included in the
programs, combinations, and songs will not be loaded
when you load a KARMA Music Workstation .PCG file
or .SNG file. After loading, the arpeggiator-related
parameters will be set to their default values.
Global mode parameters
• The KARMA Music Workstation system version 2.0
setting “S/S Out P/C” is maintained as internal data,
but will be ignored.
• The KARMA Music Workstation system version 2.0
setting “MIDI Clock” Auto setting will be set to External
MIDI.
• “Foot Switch Assign” settings of KARMA Latch On/Off,
KARMA RTC Knob 1 ... KARMA Chord Trigger 4 (only
in KARMA system version 2.0) settings will be set to Off.
• “Foot Pedal Assign” settings of KARMA RTC Knob 1 ...
KARMA RTC Knob 8 (only in KARMA system version
2.0) settings will be set to Off.
• The “Auto KARMA Program” setting will be used as the
“Auto Arpeggiator Program” parameter.
• The “Auto KARMA Combi” setting will be used as the
“Auto Arpeggiator Combination” parameter.
• The various Audio Input parameters will maintain their
settings prior to loading.
Sequencer mode parameters
• The KARMA system version 2.0 “Tone Adjust” setting
will be loaded correctly. If a KARMA system version 1.0
file is loaded, this parameter will be set to the default
value.
8-2. Parameters that are valid on the TRITON Le but invalid
on the TRITON Extreme
Insert effects (IFX)
• The insert effect (IFX) parameters of Combination,
Program, and Sequencer modes will be loaded as
parameters for IFX1.
The parameters of IFX2...IFX5 will be set to the default
values.
Drum kits
Drum kits 00–15 (INT) will be loaded into 00–15 (A/B),
and drum kits 16–23 (User) will be loaded into 16–23
(EH).
Arpeggio patterns
Arpeggio patterns U000–119 (INT) will be loaded into
U000–199 (A/B), and arpeggio patterns U200–215 (User)
will be loaded into U200–215 (E–A).
Program mode Audition Riff and Transpose settings
Since the TRITON STUDIO does not have an Audition
Riff function, these parameters will be maintained as
internal data but will be ignored.
Sequencer mode parameters
“Tone Adjust,” parameters will be set to their default val-
ues.
To Next Page
Loading...
