EasyManua.ls Logo

KOSTAD CPC 50 - Safety Instructions; Information for the Person Responsible for the Installation; The Five Safety Rules

KOSTAD CPC 50
246 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CPC50|60|90|120
Operating instructions, 012/2020,
9
Safety instructions
2
2.1 Information for the person responsible for the installation
When using the charging station outside the European Community, observe the country-specific
regulations. Follow the local and industry-specific safetyand installation regulations.
Those responsible for the installation must ensure the following:
Planning and project work as well as all work on and with the machine is only carried out by
qualified personnel.
The operating instructions are always available during all work.
The technical data and the information on the permissible installation, connection, ambient
and operating conditions are consistently observed.
The specific erection and safety regulations as well as the regulations for the use of
personal protective equipment are observed.
Note
Make use of the support and services of the responsible Customer Support (office@kostad.at) for
planning, installation, commissioning and service tasks.
You will find safety instructions in the individual chapters of this document. For your own safety, for
the protection of other persons and to avoid damage to property, it is essential that you comply with
the safety instructions.
Observe the following safety instructions for all activities on and with the charging station.
2.2 The five safety rules
For your personal safety and to avoid damage to property, always observe the safety-relevant
instructions and the following five safety rules according to EN 50110-1 "Working in a de-energised
state" during all work. Apply the five safety rules in the stated order before starting work.
Five safety rules
1. Unlock.
Also switch the auxiliary circuits free, e.g. standstill heating.
2. Secure against being switched on again.
3. Determine the absence of voltage.
4. Earth and short-circuit.
5. Cover or fence off adjacent live parts.

Table of Contents