1 About this document
1.1 Target groups
1 About this document
1.1 Target groups
The instructions are intended for the following persons:
o Persons who work with the product
o Operator-owners who are responsible for the use of the product
Persons who work with the product must be qualified. The qualification ensures that possible dangers
and damage to property that are connected to the activity are detected and avoided. These persons
are qualified personnel who carry out the work properly due to their training, knowledge and experience
and on the basis of the relevant provisions.
Information on the qualification of the personnel is provided separately at the beginning of the indi-
vidual chapters in these instructions. The following table provides an overview.
Target group Activity Qualification
Fitter Mounting, connection Qualified personnel for mounting
Electrician Electrical connection Qualified personnel for electric installation
Trained personnel Delegated task Personnel trained by the operator-owner who know the
task delegated to them and the possible dangers arising
through improper behaviour.
Tab.1: Target groups
1.2 Associated documents
o Declaration of conformity according to EU Directive 2014/30/EU
o Corresponding operating instructions of the flowmeter
o Corresponding operating instructions of the sensor
o Calibration certificate
1.3 Symbols
1.3.1 Danger levels
Signal word Danger level Consequences of non-observance
DANGER Immediate threat of danger Serious personal injury, death
WARNING Possible threat of danger Serious personal injury, invalidity
CAUTION Potentially dangerous situation Slight personal injury
ATTENTION Potentially dangerous situation Material damage
1.3.2 Danger signs
Meaning Source and possible consequences of non-observance
Electrical voltage Electrical voltage causes serious physical injury or death.
Operating instructions
OIE 26en-GB Edition 2021-08
3
To Next Page
Loading...
