BA 35203_04 * 3.0 * 35203_04_07_Wartung.fm 7-79
Maintenance 7
Status check of ash and soot load
1. Press touch button 61 in the display repeatedly until the symbol "ECU"
appears in the digital display.
2. Press touch button 62 in the display repeatedly until the symbol " "
appears in the digital display.
➥ Ash = ash load in %
➥ Soot = soot load in %
3. At an ash load of 105%, due maintenance is indicated by warning
light 66, an acoustic warning and a corresponding CAN message in the
digital display.
At an ash load of 100 %, have an authorized service center replace the
diesel particulate filter.
► Repair and maintenance work on the diesel particulate filter may be
performed only by authorized service centres and trained personnel.
► In the DEUTZ exchange program, dirty diesel particulate filters can be
returned and replaced with a clean filter.
Fig. 302
61
ECU
%___Ash
%___Soot
66
62
To Next Page
Loading...
