5.1 Connecting to a PC
You can connect a PC either using the RS-232 port or the USB port.
5.1.1 Connecting a PC via the RS-232 Serial Port
You can connect to the 840Hxl via an RS-232 connection using, for example, a
PC. Note that a null-modem adapter/connection is not required.
To connect to the product via RS-232:
Connect the RS-232 9-pin D-sub rear panel port on the product unit via a
9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3, and pin 5 to pin 5
need to be connected) to the RS-232 9-pin D-sub port on your PC
5.1.2 Connecting a PC via the USB Port
To connect the 840Hxl via a USB port:
1. Using a USB cable, connect the 840Hxl to a USB port on the PC.
2. Install the USB driver as described in Section 6.2.1.
To Next Page
Loading...