Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 2
2.3 Recycling Kramer Products 3
3 Overview 4
4 Defining the 840Hxl Pattern Generator 5
5 Connecting the 840Hxl 7
5.1 Connecting to a PC 8
6 Operating the 840Hxl Pattern Generator 9
6.1 Operating the 840Hxl Using the Front Panel Buttons 11
6.2 Operating the 840Hxl Using the Control Application 12
7 Technical Specifications 21
8 Serial Protocol 22
8.1 Command Format 22
8.2 Device Response 22
8.3 Commands 23
Figures
Figure 1: 840Hxl Pattern Generator Front Panel 5
Figure 2: 840Hxl Pattern Generator Rear Panel 6
Figure 3: Connecting the 840Hxl Pattern Generator 7
Figure 4: Found New Hardware Wizard Window 13
Figure 5: File Location Selection Window 13
Figure 6: Insert Disk Window 14
Figure 7: Connection Method Window 15
Figure 8: Connection Error Message 16
Figure 9: Controller Software Main Window 16
Figure 10: Menu Bar 17
Figure 11: About 18
Figure 12: User Defined Resolution Window 18
Figure 13: User Defined Resolution Advanced Window 19
Figure 14: User Defined Resolution Advanced Window–Detailed Timing Descriptor Tab 20
To Next Page
Loading...