Kramer 840Hxl

840Hxl - Operating the 840Hxl Pattern Generator
17
17
#
Feature
Function
1
CONNECT Button
Press to connect to a device (see Section 6.2.2)
2
COMMON Resolutions Buttons
Press to select a pre-configured output resolution
3
USER DEFINED Resolutions Buttons
Press to select a user-defined output resolution
4
User Defined Resolution Edit Buttons
Press to edit the relevant user defined output resolution
5
Patterns Buttons
Press to select an output pattern
6
Output Settings Buttons
Press to modify the output settings:
Signal Mode—HDMI, DVI, Auto
HDCP—HDCP, No HDCP
Color Space—RGB, YUV 444, YUV 422, Auto
Color Depth—24 bit, 30 bit, 36 bit, Auto
Audio Sample Rate—44kHz, 48kHz, 88kHz, 96kHz,
176kHz, 192kHz, Auto
Audio Sample Depth—16 bit, 20 bit, 24 bit, Auto
7
Status of Connected Display
Information on the currently connected display
8
Status of Output
Information on the currently selected output settings
9
EDID Info
Click on Get EDID Info from the menu bar to display
EDID information from the connected display. If there is
no display connected, random data is displayed
6.2.4 The Menu Bar
Figure 10: Menu Bar
There are four functions available from the menu bar:
 Device Reset—Resets the device to factory default settings
 Get EDID Info—Reads EDID data from an attached display device
 About—Displays the current software version number, (see Figure 11)
 Check for updates—Checks that the current software version is the latest
available