Kramer SID-X3N

SID-X3N - Protocol 3000
31
31
12.2 Kramer Protocol 3000 Commands
The following table lists the Protocol 3000 commands that the SID-X3N supports.
For a full description of the commands, see the Kramer Protocol 3000 document
available from http://www.kramerelectronics.com.
Note: The SID-X3N can only receive commands from a device, (for example, an
HDBT receiver) via the HDBaseT link, and only at 9600bps.
Command
Description
#
Protocol handshaking
MODEL?
Read device model
STEPIN-CP?
Get module Step-in capabilities
VID
Set video switch
VID?
Get video switch status
Command - MODEL?
Command Type - System-mandatory
Command Name
Permission
Transparency
Set:
-
-
-
Get:
MODEL?
End User
Public
Description
Syntax
Set:
-
-
Get:
Get device model
#MODEL?␍
Response
~nn@MODEL␠model_name␍␊
Parameters
model_name - String of up to 19 printable ASCII chars
Response Triggers
Notes