Kramer VP-551X

Kramer Electronics Ltd.
VP-551X – Technical Specifications
51
Default Communication Parameters
RS-232
Baud Rate:
115,200
Data Bits:
8
Stop Bits:
1
Parity:
None
Command Format:
ASCII
Example (Route the video HDMI2 input to the output ports):
#ROUTE 1,1,2<cr>
Ethernet
To reset the IP settings to the factory reset values go to: Menu->Setup -> Factory Reset-> press Enter to
confirm
IP Address:
192.168.1.39
Subnet mask:
255.255.0.0
Default gateway:
192.168.0.1
TCP Port #:
5000
UDP Port #:
50000
Default Username / Password:
Admin / Admin
Number of TCP clients
4
Number of UDP clients
2
Full Factory Reset
OSD
Go to: Menu-> Factory-> RESET-> YES and press Enter
Input Resolutions Support
VP-551X supports the following input resolutions.
HDMI Input Resolutions
480i/576i
480p/576p
1080i@60/50Hz
720p@60/50Hz
1080p@60/50Hz
1080p@24/25/30Hz
640x480@60/72/75/85Hz
800x600@56/60/72/75Hz
1024x768@60/70/75Hz
1280x1024@60/75Hz
1280x960@60Hz
1280x720@60Hz
1920x1080@60Hz
1600x1200@60Hz
1280x768@60Hz
1280x800@60Hz
1360x768@60Hz
1366x768@60Hz
1400x1050@60Hz
1600x900@60Hz RB
1680x1050@60Hz
1920x1200@60Hz RB
4K2K@50/60Hz (4:2:0),
4K2K@24/25/30/50/60Hz (4:4:4)
Computer Graphics Input Resolutions
640x480@60/72/75/85Hz
800x600@56/60/72/75Hz
1024x768@60/70/75Hz
1280x1024@60/75Hz
1280x960@60Hz
1280x720@60Hz
1920x1080@60Hz
1600x1200@60Hz
1280x768@60Hz
1280x800@60Hz
1360x768@60Hz
1366x768@60Hz
1400x1050@60Hz
1680x1050@60Hz
1920x1200@60Hz RB
CV Input Resolution
480i/576i