Kramer VP-551X

Kramer Electronics Ltd.
VP-551X – Using the Embedded Webpages
45
Defining Auto Switching Mode
Define auto switching mode (also set via the OSD menu, see Setting Switching Mode
on page 17).
To define auto switching mode:
1. In the Navigation pane, click Advanced. The Advanced page appears.
2. Next to Auto Switching, open the drop-down box to select the switching mode (Off
(manual), Auto Scan or Last Connected).
Figure 41: Advanced Page – Defining Switching Mode
Defining Lock Mode
Define lock mode (also set via the OSD menu, see Setting Lock Mode Functionality
on page 18).
To define Lock mode:
1. In the Navigation pane, click Advanced. The Advanced page appears.
2. Next to Lock Mode, open the drop-down box to select the lock mode (All, Menu Only, All
& Save or Menu Only & Save).
Figure 42: Advanced Page – Defining Lock Mode