Kramer VP-551X User Manual

Kramer Electronics Ltd.
VP-551X – Operating and Controlling VP-551X
11
Controlling Device Via OSD Menu
Use the OSD buttons to control the VP-551X via the OSD menu (for more information,
see Navigating OSD Buttons on page 11).
The default OSD timeout is set to 10 seconds.
Use the OSD menu to perform the following operations:
• Setting Image Parameters on page 12.
• Selecting the Input Signal on page 12.
• Setting Output Parameters on page 13.
• Setting the Audio Source on page 14.
• Setting OSD Parameters on page 15.
• Managing EDID on page 16.
• Setting HDCP on page 16.
• Setting Sleep Mode on page 17.
• Setting Switching Mode on page 17.
• Setting Ethernet Parameters on page 17.
• Setting Lock Mode Functionality on page 18.
• Setting Daily Reset Schedule on page 18.
• Viewing Device Hours. on page 18.
• Viewing Device Information on page 19.
• Performing Factory Reset on page 19.
Navigating OSD Buttons
To enter and use the OSD menu buttons:
1. Press MENU.
2. Press:
▪ ENTER to accept changes and to change the menu settings.
▪ Arrow buttons to move through the OSD menu, which is displayed on the video
output.
▪ EXIT to exit the menu.

Kramer VP-551X Specifications

General

Brand	Kramer
Model	VP-551X
Category	Media Converter
Language	English