Kramer VP-551X

Kramer Electronics Ltd.
VP-551X – Operating and Controlling VP-551X
15
Talkover Mode
Figure 10: Talkover Mode
Setting OSD Parameters
To set the OSD parameters:
1. On the front panel press MENU. The menu appears.
2. Click OSD and define the OSD parameters according to the information in the following
table:
Menu Item
Function
H-Position
Set the horizontal position of the OSD.
V-Position
Set the vertical position of the OSD.
Timer
Set the timeout period to Off or up to 60 seconds (default 10).
Transparency
Set the OSD background between 100 (transparent) and 0 (opaque).
Display
Select the information displayed on-screen during operation:
Info (default) – the information appears for 10 seconds.
On – the information appears constantly.
Off – the information does not appear.