Kramer VP-551X

Kramer Electronics Ltd.
VP-551X – Operating and Controlling VP-551X
12
Setting Image Parameters
To set the image parameters:
1. On the front panel press MENU. The menu appears.
2. Click Picture and define the image parameters according to the information in the
following table:
Menu Item
Function
Contrast
Set the contrast.
Brightness
Set the brightness.
Finetune
Input Signal
Function
PC
Phase – set the phase of the sampling clock.
Clock – set the frequency of the sampling clock.
H-Position – set the horizontal picture position.
V-Position – set the vertical picture position.
Video
HUE – set the color hue.
Saturation – set the color saturation.
Sharpness – set the sharpness of the picture.
NR (Noise Reduction) – select the noise reduction filter:
Off (default), Low, Middle or High.
Color
Set the Red, Green and Blue shades.
Selecting the Input Signal
To set the input source:
1. On the front panel press MENU. The menu appears.
2. Click Input and select the input source:
▪ HDMI 1(default) to HDMI 8.
▪ PC.
▪ CV.